Structure Cabling Installation Company in Dubai-Timevision

Structure cabling is the end-to-end connectivity. Which connects the network through PCs and network switches. The speeds depend upon the cable’s category. Most probably cat 6 cables were used for the structure cabling at the termination point it provided 100 mega bites per second speed. Cat 6 ethernet cable consists of 4 twists of copper wire and 250 MHZ of bandwidth.

Major Components are included in structure cabling

1) Cat-6 cable

2) Keystone Jacks

3) Faceplates

4) Patch panel

5) Cable dressing

6) Cable arrangement

7) Cable labeling

8) Fluke testing

Cat-6 cable

Cat-6 cable 305 meters in one box, the maximum data transfer speed drops to approximately 1 Gbps. They are up-to-spec for applications with substantial data transfer needs, these types of cables are widely used in smart homes, schools, residential, and commercial buildings. Networking setups and data centers. Cat6 cables are now the global standard for Ethernet cables.

Keystone Jacks

Keystone jacks are an important component in local area networks. That makes use of patch panels and wall plates. It’s a female connector for connecting different types to the wider network that are designed to snap into modular wall plates and patch panels.

Patch panel

A patch panel in a local area network (LAN) is a mounted hardware assembly that contains ports that are used to connect and manage incoming and outgoing LAN cables. A patch panel provides a way to keep large numbers of cables organized, enabling flexible connectivity into network hardware located in a data center or an access or wiring closet.

Fluke testing

Patch cord testing is a method to measure the performance of the network patch cords themselves, thus it has the highest level of requirements for the cable performance. A network patch cable passing the patch cord testing usually has higher performance and is more durable and reliable to be deployed in high-end data centers because it can avoid packet or data losses